Home | Product Listing | Shipping/Policies | Testimonials | Links | Contact Us

Product Listing

 70-81 F Body  Page:  Previous    1  -  2  -  3    Next  

Aluminum Hubs, '78-81 F body, LATE spindle
NEW for 2011! Custom lightweight aluminum hubs for your '78-81 F body using any of our kits: C4-C6, Wilwood, Custom, etc. Price per pair which includes bearings and seals, and custom aluminum bolt on dust covers. Hubs will arrive fully assembled and packed with synthetic grease, ready to install. Item #2GALUMHUBLATE

Price $400.00 

Click for details

Baer Custom C5 Setup

Requires 17" wheels
Eradispeed drilled, slotted, zinc washed rotors

Item #2GBRC5

Price $1300.00 

Click for details

Banjo bolts
OEM GM banjo bolts, price per pair.
Fits most calipers except for Wilwood
10mm x 1.0
Item #Banjos

Price $15.00 

Click for details

Banjo bolts, misc GM applications
Banjo bolts for most GM caliper applicaitons, price per pair.
Fits most calipers except for Wilwood
10mm x 1.0 thread, crush washers included
Item #FNB BANJOS

Price $15.00 

Click for details

Braided front line set, early style fitting
Braided front line set, used in LS1, C4-C6, 1LE upgrades
DOT approved, price is per line pair.
Item #FTLINESEARLY

Price $100.00 

Click for details

C4 HD adapter brackets, 2nd gen F body

Allows installation of 13" C4 HD brakes onto stock/dropped 2nd Gen spindles
Laser cut steel
Zinc coated standard, powdercoating available
Mounting hardware included

Item #2GC4HDBKT

Price $70.00 

Click for details

C5 brake upgrade

C5 Corvette brake kit
Ceramic pads, braided lines included
Complete kit, no additional parts needed

Item #2GC5

Price $950.00 

Click for details

C5 brake upgrade, ZO6 calipers

C5 ZO6 Corvette brake kit
Ceramic pads, braided lines included
Complete kit, no additional parts needed

Item #2GC5ZO6

Price $950.00 

Click for details

C5 conversion hubs, '70-77 early spindle
Zinc coated for corrosion protection and good looks, these hubs allow you to install the -97-04C5 slip fit rotor onto your modified spindles. This hub uses the smaller EARLY bearing used on '70-77 F bodies. New longer studs and bearing races are installed for you, assembled as shown. Bearings are not included but are available. Item #2GC5HubEarly

Price $140 

Click for details

C5 conversion hubs, '77-81 LATE spindle
Zinc coated for corrosion protection and good looks, these hubs allow you to install the -97-04C5 slip fit rotor onto your modified spindles. This hub uses the smaller EARLY bearing used on '77-81 F bodies. New longer studs and bearing races are installed for you, assembled as shown. Bearings are not included but are available. Item #2GC5HubLATE

Price $140 

Click for details

C5/C6 caliper guide pin kit
C5/C6 front or rear caliper guide pin and bushing kit. All new kit includes (4) caliper guide pins, (4) pin seals, and (4) caliper to pin screws. Item #CalPinKit

Price $40.00 

Click for details

C6 Z51 setup

C6 Z51 brake setup
Factory drilled rotors
Stock gray calipers supplied

Item #2GZ51

Price $1000.00 

Click for details

C6 Z51 setup, ZO6 calipers

C6 Z51 brake setup
Factory drilled rotors
C5 ZO6 calipers supplied

Item #2GZ51ZO6

Price $1025.00 

Click for details

Custom hubs, Brembo SS 4/6 piston brakes, early spindle
Custom hubs to allow installation of 2010+ Brembo SS 4/6 piston brakes; per pair
For EARLY spindles with smaller Set 2 outer bearing
Item #2GBremboHubERL

Price $165.00 

Click for details

Custom hubs, Brembo SS 4/6 piston brakes, late spindle
Custom hubs to allow installation of 2010+ Brembo SS 4/6 piston brakes; per pair
For LATE spindles with the larger Set 3 outer bearing.
Item #2GBremboHubLAT

Price $165.00 

Click for details

Custom hubs, C4/C5/C6 kits, ARP, 2nd Gen EARLY
Custom hubs for C4, C5, C5 base kits, ARP studs, per pair
For EARLY spindles with smaller Set 2 outer bearing
Item #2GC5ERLARP

Price $150 

Click for details

Custom hubs, C4/C5/C6 kits, ARP, 2nd Gen LATE
Custom hubs for C4, C5, C5 base kits, ARP studs, per pair
For LATE spindles with larger Set 3 outer bearing
Item #2GC5LATEARP

Price $150 

Click for details

Custom hubs, C4/C5/C6, 2nd Gen EARLY
Custom hubs for C4, C5, C5 base kits, standard studs, per pair
For EARLY spindles with smaller Set 2 outer bearing
Item #2GC5STDERL

Price $140 

Click for details

 Page:  Previous    1  -  2  -  3    Next  

Flynbye Performance LLC • 109 Melbourne Drive • Fort Mill, SC • USA • 29708 • Phone: 803.396.5693

This site  The Web

Website hosting by Web.com